FOTECHEM |
 | | | FOTECHEM 2002 - Hazard-free, flow-support coupled up with degreaser for direct emulsion coating
FOTECHEM 2002 is a ready-to-use gel to be applied by brush or coating trough. | FOTECHEM 2022 is the liquid concentrate of FOTECHEM 2002 that can be diluted 1:10 with water and be applied by brush or spray | | FOTECHEM |
 | | | FOTECHEM 2022 - Hazard-free, flow-support coupled up with degreaser for direct emulsion coating (Concentrate)
FOTECHEM 2022 is the liquid concentrate of FOTECHEM 2002 that can be diluted 1:10 with water and be applied by brush or spray. | | FOTECHEM |
 | | | FOTECHEM 2051 - consult the CLEANMiX Flyer
The ultimate FOTECO CLEANMiX system | Ink Wash-up + Stencil-Removal + Mesh Degreasing | | FOTECHEM |
 | | | FOTECHEM 2089 - One-component cleaning gel
FOTECHEM 2089; to be applied by coating trough, for the post-cleaning after stencil removal. | Brownish. | Ready-to-use. | Alcaline gel. | Contains solvents. | Can be used with all types of meshes. | Removes ink and emulsion residues. | | FOTECHEM |
 | | | FOTECHEM 2154 - Liquid Light
FOTECHEM 2154; this is an entirely new concept of a stencil making chemical. | It helps to reduce the
negative effects of underexposure and can be used with all FOTECOAT emulsions. | | FOTECHEM |
 | | | FOTECHEM 2320 - 2-Component Screen Adhesive RED
FOTECHEM 2320; This FOTECO product is intended for a fast and reliable bonding of screen mesh to printing frames made of aluminium, steel or wood and features a very high adhesion power. | The system consists of FOTECHEM 2320 (Adhesive), FOTECHEM 2325 (Hardener, Catalyst) and FOTECHEM 2327 (Reducer). | | FOTECHEM |
 | | | FOTECHEM 2325 - 2-Component Screen Adhesive Hardener
FOTECHEM 2325; This FOTECO product is intended for a fast and reliable bonding of screen mesh to printing frames made of aluminium, steel or wood and features a very high adhesion power. | The system consists of FOTECHEM 2320 (Adhesive), FOTECHEM 2325 (Hardener, Catalyst) and FOTECHEM 2327 (Reducer). | | FOTECHEM |
 | | | FOTECHEM 2330 - 2-Component Screen Adhesive CLEAR
FOTECHEM 2330; This FOTECO product is intended for a fast and reliable bonding of screen mesh to printing frames made of aluminium, steel or wood and features a very high adhesion power. | The system consists of FOTECHEM 2330 (Adhesive), FOTECHEM 2335 (Hardener, Catalyst) and FOTECHEM 2327 (Reducer). | | FOTECHEM |
 | | | FOTECHEM 2335 - 2-Component Screen Adhesive Hardener
FOTECHEM 2335; This FOTECO product is intended for a fast and reliable bonding of screen mesh to printing frames made of aluminium, steel or wood and features a very high adhesion power. | The system consists of FOTECHEM 2330 (Adhesive), FOTECHEM 2335 (Hardener, Catalyst) and FOTECHEM 2327 (Reducer). | | FOTECHEM |
 | | | FOTECHEM 2340 - One component frame adhesive
FOTECHEM 2340; Very rapid drying.| Ready-to-use, clear color. | Resists only to mild solvents for a short period. | Resists however to all stencil removal chemicals. | Can be used on all types of frames, including wood. | Suitable for high tension stretching. | Can be diluted for cleaning with toluene. | Resists up to 40°C (104°F). | | FOTECHEM |
 | | | FOTECHEM 2350 - 2-Component Screen Adhesive GREEN
FOTECHEM 2350; This FOTECO product is intended for a fast and reliable bonding of screen mesh to printing frames made of aluminium, steel or wood and features a very high adhesion power. | The system consists of FOTECHEM 2350 (Adhesive), FOTECHEM 2355 (Hardener, Catalyst) and FOTECHEM 2327 (Reducer). | | FOTECHEM |
 | | | FOTECHEM 2355 - 2-Component Screen Adhesive Hardener
FOTECHEM 2355; This FOTECO product is intended for a fast and reliable bonding of screen mesh to printing frames made of aluminium, steel or wood and features a very high adhesion power. | The system consists of FOTECHEM 2350 (Adhesive), FOTECHEM 2355 (Hardener, Catalyst) and FOTECHEM 2327 (Reducer). | | FOTECHEM |
FOTECOAT |
 | | | FOTECOAT 1010 - DIAZO Screen Emulsions dual-cure
Fast, dual cure diazo photopolymer screen process emulsion with separate diazo sensitiser powder in sachets, for solvent based and co-solvent ink systems. | Light purple color. | Medium viscosity. | Short exposure time. | Ecologically sound. | Must be processed and stored at temperatures not over 20°C. | | FOTECOAT |
 | | | FOTECOAT 1019 - DIAZO Screen Emulsions dual-cure
Fast, dual-cure diazo photopolymer screen process emulsion with separate diazo sensitizer powder in sachets, for co-solvent ink systems (inks containing a combination of solvents and water) | Purple color | High viscosity | Short exposure time | Ecologically sound | Must be processed and stored at temperatures not over 20°C | | FOTECOAT |
 | | | FOTECOAT 1019 BLUE - DIAZO Screen Emulsions dual-cure
Fast, dual-cure diazo photopolymer screen process emulsion with separate diazo sensitizer powder in sachets, for co-solvent ink systems (inks containing a combination of solvents and water) | Blue color | High viscosity | Short exposure time | Ecologically sound | Must be processed and stored at temperatures not over 20°C | | FOTECOAT |
 | | | FOTECOAT 1020 - DIAZO Screen Emulsions dual-cure
Very fast, dual cure diazo photopolymer screen process emulsion with separate diazo sensitizer powder in sachets, for solvent based and UV-inks. | Light purple color. | Medium viscosity. | Designed for Direct Light Exposure with digital UV-bulbs, laser and exposure diodes. | Can also be exposed with standard contact light systems. | | FOTECOAT |
 | | | FOTECOAT 1021 - DIAZO Screen Emulsions dual-cure
Very fast, dual cure diazo photopolymer screen process emulsion with separate diazo sensitizer powder in sachets, for solvent based and UV-inks. | Blue-purple color. | Medium viscosity. | Designed for Direct Light Exposure with digital UV-bulbs, laser and exposure diodes. | Can also be exposed with standard contact light systems. | | FOTECOAT |
 | | | FOTECOAT 1065 - DIAZO Screen Emulsions dual-cure
Fast, duo-cure polymer textile printing screen process emulsion with separate diazo sensitizer powder, for aqueous ink systems. | Blue color with excellent see-through. | The ready-made stencil can be post-hardened by light to increase the resistance. | Very short exposure time. | Ecologically sound. | | FOTECOAT |
 | | | FOTECOAT 1068 - DIAZO Screen Emulsions dual-cure
Textile printing with inks containing water and solvents; ideal for plastisols, glass and ceramic printing.Fast dual cure polymer screen emulsion; purple. | The ready to print screens can be post-exposed to increase the printing resistance. | For longer runs a chemical hardening (catalyzing) is necessary. | | FOTECOAT |
 | | | FOTECOAT 1069 - DIAZO Screen Emulsions dual-cure
For printing with inks containing water or solvents; ideal for plastisols, glass decoration and abrasive ink printing. | Fast dual cure polymer screen emulsion; blue. | Sensitizing with separate diazo powder: C2 for 1 kg set, C7 for 4,5 kg set. | The ready to print screens can be post-exposed to increase the printing resistance. | For longer runs a chemical hardening (catalyzing) is necessary. | | FOTECOAT |
 | | | FOTECOAT 1069 FAST - FOTECOAT 1069 FAST
Shorter exposure time; also suitable for CtS | | FOTECOAT |
 | | | FOTECOAT 1069 HV - FOTECOAT 1069 HV
Extra thick, results in an extra high stencil build-up | | FOTECOAT |
 | | | FOTECOAT 1070 - DIAZO Screen Emulsions dual-cure
Fast, dual-cure diazo photopolymer screen emulsion | for co-solvent ink systems | MATT stencil surface to avoid off-setting in contact with ink-jet films | purple colour | high viscosity | short exposure time. | | FOTECOAT |
 | | | FOTECOAT 1072 - DIAZO Screen Emulsions dual-cure
Fast, duo-cure diazo-polymer screen process emulsion with separate diazo sensitizer powder, for solvent based inks. | Purple color, excellent definition and resolution. | Solvent and humidity resistant. | The ready-made stencil can be post-hardened by light to increase the ink suitability and to facilitate stencil removal. | Short exposure time. | | FOTECOAT |
 | | | FOTECOAT 1075 - DIAZO Screen Emulsions dual-cure
New development for printing with abrasive inks. | Fast, solvent resistant diazo photopolymer screen emulsion, duo-cure. | Excellent flexibility coupled with improved adhesion to the mesh. | Very high definition and resolution. | Appropriate for long press life for the packaging printing industry. | Good transparency with light purple colour. | Recommended for UV inks. | | FOTECOAT |
 | | | FOTECOAT 1076 - Extra high resolution emulsion for V-mesh
Extra high resolution emulsion for V-mesh (VECTRY of NBC) and steel mesh. | Fast, dual cure diazo photopolymer screen process emulsion for solvent based ink systems. | Light blue color. | Medium viscosity. | For lower viscosity water can be added. | Attention: Let degas for 1 week after sensitizing! | | FOTECOAT |
 | | | FOTECOAT 1569 - DIAZO Screen Emulsion traditional
100% solvent resistant screen emulsion with separate diazo powder sensitizer. | Normal exposure time; very easy to remove. | Touch ups are practically avoided; wash-out is fast and easy and does not need a high pressure device. | Light purple in color for good transparency. | | FOTECOAT |
 | | | FOTECOAT 1570 - DIAZO Screen Emulsion traditional
Fast, fully solvent resistant screen emulsion with separate diazo powder sensitizer. | Easy to remove. | Blue in color for good transparency. | | FOTECOAT |
 | | | FOTECOAT 1636 - DIAZO Screen Emulsion traditional
Fast, water resistant screen emulsion with separate diazo powder sensitizer for textile screen printing. | Can be decoated with a high ressure water device. | Light purple with good see-through. | | FOTECOAT |
 | | | FOTECOAT 1669 - DIAZO Screen Emulsion traditional
Water resistant screen emulsion with separate diazo powder sensitizer. | Can be decoated with a high pressure water device. | Purple with good contrast. | | FOTECOAT |
 | | | FOTECOAT 1711 - DIAZO Screen Emulsion traditional
Diazopolymer screen emulsion with separate diazo-powder sensitizer for solvent based inks. | Light purple after exposure with excellent transparency. | Ideal for humid and warm climates. | Economic, biologically sound. No warning on the label. | | FOTECOAT |
 | | | FOTECOAT 1771 - DIAZO Screen Emulsion traditional
Hard and fast screen emulsion with separate diazo-powder sensitizer for most solvent based inks. | Blue color after exposure with high contrast. | Ideal for humid and warm climates. | Economic, biologically sound. | No warning on the label. | | FOTECOAT |
 | | | FOTECOAT 1772 - DIAZO Screen Emulsions (separate dye)
High definition screen emulsion with separate diazo-powder sensitizer for most solvent based inks. | Available undyed with separate purple dye or as purple emulsion. | Available for extra short exposure (with C33 diazo-powder) or for standard exposure with C8J sensitizer. | Denomination short version: FOTECOAT 1772 FAST. | Biologically sound, qualified as harmless chemical. | No warning symbol on the label. | | FOTECOAT |
 | | | FOTECOAT 1811 SOLO - SOLO Screen Emulsion one component ready-to-use
Presensitized screen emulsion; red, solvent and humidity resistant | High viscosity for coarse and fine meshes. | Excellent flow-out; avoiding pin-holes caused by too fast coating. | Usable on white and yellow mesh. | Fast wash-out. | Excellent resistance to solvent based inks and its screen washes. | Decoatable with all chemicals used for emulsion stencil removal. | | FOTECOAT |
 | | | FOTECOAT 1834 SOLO - SOLO Screen Emulsion one component ready-to-use
Green, one-component polymer screen emulsion, ready to use. | 40% solids; viscosity 2200 cps. | Ultra fast exposure time. | Water resistant to a large extent, highly improved flexibility. | The emulsions can be used for: 1) the production of thick stencils by the casting process; 2) the transfer of THICKFILM FOTECAP TECNO. | FOTECOAT 1834 SOLO has good water resistance. | The use of the screen emulsion is described in the leaflet FOTECAP CAPILLARY FILMS. | | FOTECOAT |
 | | | FOTECOAT 1835 SOLO - SOLO Screen Emulsion one component ; high density
Ready-to-use presensitized screen emulsions for the production of extra thick screen process stencils by the wet in wet coating method. | | FOTECOAT |
 | | | FOTECOAT 1836 WR - SOLO Screen Emulsion one component ready-to-use
Fast, presensitized polymer screen emulsion. | Processing under yellow light is recommended because of the high light sensitivity. | FOTECOAT 1836 WR SOLO is magenta, the stencils allow excellent seethrough. | Smaller quantities can be evacuated with the waste water. | Solids content 36%. | Can be used for printing with food products. | | FOTECOAT |
 | | | FOTECOAT 1837 SOLO - SOLO Screen Emulsion one component ; high density
Ready-to-use, presensitized and has a lower viscosity than FOTECOAT 1835 | application is similar. | | FOTECOAT |
 | | | FOTECOAT 1838 SOLO - SOLO Screen Emulsion one component ready-to-use
Fast, presensitized polymer screen emulsion. | Processing under yellow light is recommended because of the high light sensitivity. | FOTECOAT 1838 SOLO is magenta, the stencils allow excellent seethrough. | Smaller quantities can be evacuated with the waste water. | For long runs a small quantity of diazo powder sensitizer can be added directly to the FOTECOAT 1838 SOLO. | The diazo sensitizer is added to the FOTECOAT 1838 SOLO and comes in form of a sachet. | However FOTECOAT 1838 SOLO can be used without the addition of the diazo. | | FOTECOAT |
 | | | FOTECOAT 1840 SOLO - SOLO Screen Emulsion one component ready-to-use
The emulsions can be used for: 1) the production of thick stencils by the casting process; 2) the transfer of THICKFILM FOTECAP TECNO. |
FOTECOAT 1840 SOLO has good solvent resistance. | The use of the screen emulsions is described in the leaflet FOTECAP CAPILLARY FILMS. | | FOTECOAT |
 | | | FOTECOAT 1845 SOLO - SOLO Screen Emulsion one component ; high density
FOTECOAT 1845 SOLO has many unusual aspects and must be used by following the described processing technique. | Should be coated on synthetic fabric numbers from 12-64 / cm or on equivalent stainless steel meshes. | Can be coated by hand or machine wet in wet. | It is possible to apply between 5 to 20 strokes from the squeegee side. | | FOTECOAT |
 | | | FOTECOAT 1846 SOLO - SOLO Screen Emulsion one component ; high density
Ready-to-use presensitized screen emulsions for the production of extra thick screen process stencils by the wet in wet coating method. | | FOTECOAT |
 | | | FOTECOAT 1847 SOLO - SOLO Screen Emulsion one component ; high density
Ready-to-use, presensitized and has a lower viscosity than FOTECOAT 1845/1846 | application is similar. | | FOTECOAT |
 | | | FOTECOAT 1850 SOLO - SOLO Screen Emulsion one component ready-to-use
Extremely fast polymer emulsion, presensitized; free of diazo; | For ink systems based on solvents | Working under yellow light is recommended because of the increased light sensitivity | The emulsion has a light gray-blue color; the stencil has excellent see through | Harmless for sewage water and at the working place if standard industrial precautions are followed | | FOTECOAT |
 | | | FOTECOAT 1855 UV - SOLO Screen Emulsion one component ready-to-use
A remarkable, unusual screen emulsion ! | Over 60% solids, ideal viscosity for machine coating, especially suitable for UV inks. | FOTECOAT 1855 UV is grey-blue. | For many cases (posters etc.) 1 coat on the printing side will be sufficient. | Short exposure time with metal halogen lamp. Rapid wash-out, easy to decoat. | | FOTECOAT |
 | | | FOTECOAT 1860 SOLO - SOLO Screen Emulsion one component ready-to-use
Fast, presensitized emulsion ready-to-coat; free of diazo. | Completely solvent resistant and very easy to decoat. | Green color with high contrast. |Solids content 35%; high viscosity. | Economic to use. | Harmless for sewage and at the working place. | | FOTECOAT |
 | | | FOTECOAT 1915 WR - DIAZO Screen Emulsions DIR-AD
Fast, duo-cure polymer type textile printing screen process emulsion with separate diazo sensitizer powder, for aqueous ink systems. | Light purple color with excellent see-through. | The ready-made stencil can be post-hardened by light to increase the mechanical and the solvent resistance. | Very short exposure time. | Ecologically sound. | | FOTECOAT |
 | | | FOTECOAT 1920 K - DIAZO Screen Emulsions DIR-AD
Fast, duo-cure polymer type textile printing screen process emulsion with separate diazo sensitizer powder, for aqueous ink systems. | Light blue color with excellent see-through. | The ready-made stencil can be post-hardened by light to increase the mechanical and the solvent resistance. | Very short exposure time. | Ecologically sound. | | FOTECOAT |
 | | | FOTECOAT 1930 K - DIAZO Screen Emulsions DIR-AD
Direct ceramic printing on tiles in single, double and third fire. | Dual-cure diazo/polymer screen process emulsion for printing on ceramic substrates and for ceramic decalcomanias. | Suitable for most ceramic inks. | The emulsion can be post-exposed to reach complete thru-curing. | Possibility to harden chemically with FOTECHEM 2100 to produce permanent stencils. | Blue, high contrast colour to facilitate touch-ups. | FOTECOAT 1930 K is phthalate-free. | | FOTECOAT |
 | | | FOTECOAT 1970 - DIAZO Screen Emulsions DIR-AD
Economic, fool-proof, all purpose screen emulsion. | Dual-cure, photopolymer | Ideal for most ink systems | Can be sensitized by direct addition of the sensitizer powder | The sensitizer is supplied in air-tight, insulated sachets for long shelf-life | Can be post-exposed to improve the through-curing. | Blue colour with high contrast | Excellent adhesion to all meshes | The exposure time is short | Environmentally safe. | | FOTECOAT |
 | | | FOTECOAT 1975 - DIAZO Screen Emulsions DIR-AD
„Universal“ screen emulsion | Dual-cure, photopolymer | Ideal for most ink systems including acqueous UV-inks | The sensitizer is supplied in air-tight, insulated sachets for long shelf-life | Can be post-exposed to improve the through curing. The chemical hardening should be avoided as the stencil might have tendency to get brittle| Dark aqua-marine colour with high contrast | Excellent adhesion to all meshes | Exposure time is relatively long to achieve the best possible resolution coupled with an extended exposure latitude | Environmentally safe | | FOTECOAT |
 | | | FOTECOAT TRIO 1 WR - Trio Line Diazo / Bichromat
Fast, water resistant screen emulsion for textile screen printing. | Can be decoated with a high pressure water device. | Blue color with good see-through. | The diazo powder sensitizer in sachets is supplied separately. | TRIO 1 WR can be sensitized with ammonium dichromate. | | FOTECOAT |
 | | | FOTECOAT TRIO 2 SR - Trio Line Diazo / Bichromat
Fast, solvent resistant screen emulsion. | Blue color with excellent see-through. | Suitable for sensitizing with diazo powder or ammonium dichromate. | Ideal for humid and warm climates. | Economic, biologically sound. No warning on the label. | The diazo sensitizer powder is supplied separately in sachets under the code A2 for 1 kg Sets; A7 for 4,5 kg Sets. | | FOTECOAT |
 | | | FOTECOAT TRIO 3 WSR - Trio Line Diazo / Bichromat
ONE emulsion for most inks. | Fast, dual-cure diazo-polymer screen process emulsion for co-solvent ink systems (inks containing a combination of solvents and water). | Blue color. | The ready-made stencil can be post-hardened by light to increase the resistance against water. | Very short exposure time. | Ecologically sound. | The diazo sensitizer powder is supplied separately in sachets under the code A2 for 1 kg Sets; A7 for 4,5 kg Sets. | Suitable for sensitizing with ammonium dichromate. | | FOTECOAT |
| |
