|
 | | |  FOTECHEM 00 - CHEMICAL LINE Check Chart
ADHERE | DEGREASE | PREPARE | HARDEN | BLOCK-OUT | SCREEN WASH | DECOAT | RECYCLE | HAZE REMOVER | | FOTECHEM |
 | | | FOTECHEM 01 - FOTECHEM Check Chart
Chemical Line | all products and their application | | FOTECHEM |
 | | | FOTECHEM 02 - CHEMICALS MESH PREPARATION
DEGREASER | ABRASIVE DEGREASER | MESH PREPARATION |FLOW SUPPORT | | FOTECHEM |
 | | | FOTECHEM 03 - CHEMICALS MAKE-READY
SCREEN FILLERS | CHEMICAL HARDENERS | DEVELOPING | STENCIL ENERGIZER | | FOTECHEM |
 | | | FOTECHEM 04 - CHEMICALS DECOATING + HAZE REMOVAL
REMOVERS + DECOATERS | CLEANING of STENCIL RESIDUES | | FOTECHEM |
 | | | FOTECHEM 2002 - Hazard-free, flow-support coupled up with degreaser for direct emulsion coating
FOTECHEM 2002 is a ready-to-use gel to be applied by brush or coating trough. | FOTECHEM 2022 is the liquid concentrate of FOTECHEM 2002 that can be diluted 1:10 with water and be applied by brush or spray | | FOTECHEM |
 | | | FOTECHEM 2003 - Stencil Degreasing
FOTECHEM 2003 liquid ready-to-use | | FOTECHEM |
 | | | FOTECHEM 2004 - Screen Process stencil remover liquid
FOTECHEM 2004 is a ready-to-use liquid that can be used as a stencil remover. | | FOTECHEM |
 | | | FOTECHEM 2005 - Screen process stencil remover paste
FOTECHEM 2005 is a thick paste, ready to use, for the decoating of most stencil materials. | | FOTECHEM |
 | | | FOTECHEM 2010 - Screen Filler (Block-out)
FOTECHEM 2010: green; high viscosity for coarser synthetic meshes and all steel meshes for coverage with a single coat. | The screen fillers are non-flammable, self drying and solvent resistant and can be decoated with water. | They are ready-to-use and distinguishable by color and viscosity. | | FOTECHEM |
 | | | FOTECHEM 2022 - Hazard-free, flow-support coupled up with degreaser for direct emulsion coating (Concentrate)
FOTECHEM 2022 is the liquid concentrate of FOTECHEM 2002 that can be diluted 1:10 with water and be applied by brush or spray. | | FOTECHEM |
 | | | FOTECHEM 2023 - Stencil Degreasing
FOTECHEM 2023 combined abrader/degreaser gel, ready-to-use | | FOTECHEM |
 | | | FOTECHEM 2025 - Screen Process all mesh preparation gel for capillary films
FOTECHEM 2025 is a brownish gel, ready-to-use. | It helps to create a water film on the degreased mesh to allow a pin-hole free, uniform adhesion for all FOTECAP capillary films, as long as the mesh number and the dry film thickness of the capillary film correspond (see separate table). | FOTECHEM 2025 promotes water retention and uniform wetting of the sreen surface. | | FOTECHEM |
 | | | FOTECHEM 2033 - Stencil Degreasing Concentrate
FOTECHEM 2033 concentrate (add to 10 ltr of water 1 ltr 2033) | | FOTECHEM |
 | | | FOTECHEM 2040 - Liquid Stencil Remover Concentrate
FOTECHEM 2040; to make ready-to-use solutions the following formulas are applicable: mix 1 ltr with 20 ltr of water | The resulting emulsion decoating solutions can be recommended to remove standard diazo and one-component emulsions. | Depending on the type of the screen emulsion and the condition of the stencil (fully exposed and adequately cleaned from ink), the quantity of water to be added to the liquid concentrates can be increased or decreased. | | FOTECHEM |
 | | | FOTECHEM 2042 - Liquid Stencil Remover Concentrate
FOTECHEM 2042; to make ready-to-use solutions the following formulas are applicable: mix 1 ltr with 30 ltr of water | The resulting emulsion decoating solutions can be recommended to remove standard diazo and one-component emulsions. | Depending on the type of the screen emulsion and the condition of the stencil (fully exposed and adequately cleaned from ink), the quantity of water to be added to the liquid concentrates can be increased or decreased. | | FOTECHEM |
 | | | FOTECHEM 2044 - Screen Process stencil remover powder
FOTECHEM 2044 is a white, oxidizing powder that can be dissolved in water to make a liquid screen process stencil remover. | | FOTECHEM |
 | | | FOTECHEM 2048 - Liquid Stencil Remover Concentrate
FOTECHEM 2048; to make ready-to-use solutions the following formulas are applicable: mix 1 ltr with 30 ltr of water. | FOTECHEM 2048 is chemically a different product than 2040 and 2042. | The latter differ only in their concentration. | The resulting emulsion decoating solutions can be recommended to remove standard diazo and one-component emulsions. | Depending on the type of the screen emulsion and the condition of the stencil (fully exposed and adequately cleaned from ink), the quantity of water to be added to the liquid concentrates can be increased or decreased. | | FOTECHEM |
 | | | FOTECHEM 2051 - consult the CLEANMiX Flyer
The ultimate FOTECO CLEANMiX system | Ink Wash-up + Stencil-Removal + Mesh Degreasing | | FOTECHEM |
 | | | FOTECHEM 2060 - Screen Filler (Block-out)
FOTECHEM 2060: blue; medium viscosity. | The screen fillers are non-flammable, self drying and solvent resistant and can be decoated with water. | They are ready-to-use and distinguishable by color and viscosity. | | FOTECHEM |
 | | | FOTECHEM 2066 - Screen Filler (Block-out)
FOTECHEM 2066: light green; medium viscosity. | The screen fillers are non-flammable, self drying and solvent resistant and can be decoated with water. | They are ready-to-use and distinguishable by color and viscosity. | | FOTECHEM |
 | | | FOTECHEM 2070 - Screen Filler (Block-out)
FOTECHEM 2070: red; higher viscosity. | The screen fillers are non-flammable, self drying and solvent resistant and can be decoated with water. | They are ready-to-use and distinguishable by color and viscosity. | | FOTECHEM |
 | | | FOTECHEM 2077 WR - Screen Filler (Block-out)
FOTECHEM 2077 WR; is a red water resistant screen filler with self-drying characteristics and low viscosity | It can be used in combination with water based inks or adhesives and water resistant screen emulsions | To improve the water resistance, FOTECHEM 2077 WR can be hardened chemically. | | FOTECHEM |
 | | | FOTECHEM 2080 - Screen Regenerator and Cleaning System
FOTECHEM 2080 is an efficient, high-alkaline and dense paste, white. | It is water based and does not contain solvents. | | FOTECHEM |
 | | | FOTECHEM 2085 - Screen Regenerator and Cleaning System
FOTECHEM 2085 is a slightly alkaline, solvent based, emulsifying liquid with a low evaporation rate. | It does not contain harmful ingredients and has a pleasant odor. | | FOTECHEM |
 | | | FOTECHEM 2089 - One-component cleaning gel
FOTECHEM 2089; to be applied by coating trough, for the post-cleaning after stencil removal. | Brownish. | Ready-to-use. | Alcaline gel. | Contains solvents. | Can be used with all types of meshes. | Removes ink and emulsion residues. | | FOTECHEM |
 | | | FOTECHEM 2090 - consult the SCREENCLEAN Flyer
FOTECHEM 2090; a safe and economic for ghost image preventing stencil cleaning with a recyclable, odor minimizing and ready-to-use liquid. | | FOTECHEM |
 | | | FOTECHEM 2091 - One-component polyester mesh cleaning gel
FOTECHEM 2091; to be applied by coating trough or brush after stencil removal.Ready-to-use. | Alcaline gel | Contains hypochlorite | Removes ink and emulsion residues | Bleaches diazo stains. | | FOTECHEM |
 | | | FOTECHEM 2100 - Hardening solution; catalyzer
FOTECHEM 2100: Color: red | economic; most suitable for water resistant (textile) emulsions. | After application the curing needs 60°C during 1 hour or 24 hours at room temperature. | The drying oven can be used. | | FOTECHEM |
 | | | FOTECHEM 2100 CC - Check-Chart for chemical hardening of FOTECOAT screen emulsions and FOTECO films
Hardening improves the water resistance of the emulsion, but renders the stencil permanent; it can no longer be decoated. | The user has to decide between the three types: 2100 | 2110 | 2113 | | FOTECHEM |
 | | | FOTECHEM 2110 - Hardening solution; catalyzer
FOTECHEM 2110; is ready-to use; with possibility for partial removal depending on type of emulsion when further reduced with 1 part water; would need pressure spray above 50 bar for removal. | | FOTECHEM |
 | | | FOTECHEM 2111 - Hardening solution; catalyzer
FOTECHEM 2111: Color: yellowishbrownish | is concentrated but can be used as ready-touse solution. | A stronger chemical hardening takes place. | When reducing FOTECHEM 2111 1:1 with water it becomes identical to FOTECHEM 2110. | | FOTECHEM |
 | | | FOTECHEM 2113 - Hardening solution / catalyser
FOTECHEM 2113: ready-to-use water based formulation | colourless | immediate reaction | hardened stencils withstand longer print runs | Water resistant emulsions can no longer be decoated. | | FOTECHEM |
 | | | FOTECHEM 2130 - Hardening solution; catalyzer
FOTECHEM 2130: Color: blue-purpleeconomic. | Ready-to-use and usable like 2100 or 2110. | Produces a more resistant stencil than 2100. | | FOTECHEM |
 | | | FOTECHEM 2154 - Liquid Light
FOTECHEM 2154; this is an entirely new concept of a stencil making chemical. | It helps to reduce the
negative effects of underexposure and can be used with all FOTECOAT emulsions. | | FOTECHEM |
 | | | FOTECHEM 2200 - Powder developer für Indirect Stencils
FOTECHEM 2200; A + B Powder: for indirect gelatin foto stencil films | | FOTECHEM |
 | | | FOTECHEM 2320 - 2-Component Screen Adhesive RED
FOTECHEM 2320; This FOTECO product is intended for a fast and reliable bonding of screen mesh to printing frames made of aluminium, steel or wood and features a very high adhesion power. | The system consists of FOTECHEM 2320 (Adhesive), FOTECHEM 2325 (Hardener, Catalyst) and FOTECHEM 2327 (Reducer). | | FOTECHEM |
 | | | FOTECHEM 2325 - 2-Component Screen Adhesive Hardener
FOTECHEM 2325; This FOTECO product is intended for a fast and reliable bonding of screen mesh to printing frames made of aluminium, steel or wood and features a very high adhesion power. | The system consists of FOTECHEM 2320 (Adhesive), FOTECHEM 2325 (Hardener, Catalyst) and FOTECHEM 2327 (Reducer). | | FOTECHEM |
 | | | FOTECHEM 2327 - Reducer
FOTECHEM 2327; the FOTECHEM Screen Adhesive, once mixed, can be reduced with up to 10% FOTECHEM 2327 Reducer if applied on fine mesh numbers. | On request a thicker version for coarse meshes is also available. | For the cleaning of brushes and cans ethylacetate is appropriate. | | FOTECHEM |
 | | | FOTECHEM 2330 - 2-Component Screen Adhesive CLEAR
FOTECHEM 2330; This FOTECO product is intended for a fast and reliable bonding of screen mesh to printing frames made of aluminium, steel or wood and features a very high adhesion power. | The system consists of FOTECHEM 2330 (Adhesive), FOTECHEM 2335 (Hardener, Catalyst) and FOTECHEM 2327 (Reducer). | | FOTECHEM |
 | | | FOTECHEM 2335 - 2-Component Screen Adhesive Hardener
FOTECHEM 2335; This FOTECO product is intended for a fast and reliable bonding of screen mesh to printing frames made of aluminium, steel or wood and features a very high adhesion power. | The system consists of FOTECHEM 2330 (Adhesive), FOTECHEM 2335 (Hardener, Catalyst) and FOTECHEM 2327 (Reducer). | | FOTECHEM |
 | | | FOTECHEM 2340 - One component frame adhesive
FOTECHEM 2340; Very rapid drying.| Ready-to-use, clear color. | Resists only to mild solvents for a short period. | Resists however to all stencil removal chemicals. | Can be used on all types of frames, including wood. | Suitable for high tension stretching. | Can be diluted for cleaning with toluene. | Resists up to 40°C (104°F). | | FOTECHEM |
 | | | FOTECHEM 2350 - 2-Component Screen Adhesive GREEN
FOTECHEM 2350; This FOTECO product is intended for a fast and reliable bonding of screen mesh to printing frames made of aluminium, steel or wood and features a very high adhesion power. | The system consists of FOTECHEM 2350 (Adhesive), FOTECHEM 2355 (Hardener, Catalyst) and FOTECHEM 2327 (Reducer). | | FOTECHEM |
 | | | FOTECHEM 2355 - 2-Component Screen Adhesive Hardener
FOTECHEM 2355; This FOTECO product is intended for a fast and reliable bonding of screen mesh to printing frames made of aluminium, steel or wood and features a very high adhesion power. | The system consists of FOTECHEM 2350 (Adhesive), FOTECHEM 2355 (Hardener, Catalyst) and FOTECHEM 2327 (Reducer). | | FOTECHEM |
|
 | | | FOTECOAT 01 - CHECK CHART Emulsions A
DIAZO Emulsions DUAL-CURE | DIAZO TRADITIONAL | TRIO | | FOTECOAT |
 | | | FOTECOAT 02 - CHECK CHART Emulsions B
PRESENSITIZED Emulsions SOLO | PRESENSITIZED DIR-EX | PROJECTION | DIR-AD direct addition | | FOTECOAT |
 | | | FOTECOAT 1010 - DIAZO Screen Emulsions dual-cure
Fast, dual cure diazo photopolymer screen process emulsion with separate diazo sensitiser powder in sachets, for solvent based and co-solvent ink systems. | Light purple color. | Medium viscosity. | Short exposure time. | Ecologically sound. | Must be processed and stored at temperatures not over 20°C. | | FOTECOAT |
 | | | FOTECOAT 1019 - DIAZO Screen Emulsions dual-cure
Fast, dual-cure diazo photopolymer screen process emulsion with separate diazo sensitizer powder in sachets, for co-solvent ink systems (inks containing a combination of solvents and water) | Purple color | High viscosity | Short exposure time | Ecologically sound | Must be processed and stored at temperatures not over 20°C | | FOTECOAT |
 | | | FOTECOAT 1019 BLUE - DIAZO Screen Emulsions dual-cure
Fast, dual-cure diazo photopolymer screen process emulsion with separate diazo sensitizer powder in sachets, for co-solvent ink systems (inks containing a combination of solvents and water) | Blue color | High viscosity | Short exposure time | Ecologically sound | Must be processed and stored at temperatures not over 20°C | | FOTECOAT |
 | | | FOTECOAT 1020 - DIAZO Screen Emulsions dual-cure
Very fast, dual cure diazo photopolymer screen process emulsion with separate diazo sensitizer powder in sachets, for solvent based and UV-inks. | Light purple color. | Medium viscosity. | Designed for Direct Light Exposure with digital UV-bulbs, laser and exposure diodes. | Can also be exposed with standard contact light systems. | | FOTECOAT |
 | | | FOTECOAT 1021 - DIAZO Screen Emulsions dual-cure
Very fast, dual cure diazo photopolymer screen process emulsion with separate diazo sensitizer powder in sachets, for solvent based and UV-inks. | Blue-purple color. | Medium viscosity. | Designed for Direct Light Exposure with digital UV-bulbs, laser and exposure diodes. | Can also be exposed with standard contact light systems. | | FOTECOAT |
 | | | FOTECOAT 1065 - DIAZO Screen Emulsions dual-cure
Fast, duo-cure polymer textile printing screen process emulsion with separate diazo sensitizer powder, for aqueous ink systems. | Blue color with excellent see-through. | The ready-made stencil can be post-hardened by light to increase the resistance. | Very short exposure time. | Ecologically sound. | | FOTECOAT |
 | | | FOTECOAT 1068 - DIAZO Screen Emulsions dual-cure
Textile printing with inks containing water and solvents; ideal for plastisols, glass and ceramic printing.Fast dual cure polymer screen emulsion; purple. | The ready to print screens can be post-exposed to increase the printing resistance. | For longer runs a chemical hardening (catalyzing) is necessary. | | FOTECOAT |
 | | | FOTECOAT 1069 - DIAZO Screen Emulsions dual-cure
For printing with inks containing water or solvents; ideal for plastisols, glass decoration and abrasive ink printing. | Fast dual cure polymer screen emulsion; blue. | Sensitizing with separate diazo powder: C2 for 1 kg set, C7 for 4,5 kg set. | The ready to print screens can be post-exposed to increase the printing resistance. | For longer runs a chemical hardening (catalyzing) is necessary. | | FOTECOAT |
 | | | FOTECOAT 1069 - NEW FOTECOAT 1069 Standard / HV / FAST
3 Dual Cure solvent- and water resistant emulsions | 1069 Standard with medium viscosity and high flexibility / 1069 HV with extra high flexibility to be used on coarse mesh / 1069 FAST with a shorter exposure time than FOTECOAT 1069 Standard | See also Technical Information for 1069. | | FOTECOAT |
 | | | FOTECOAT 1069 FAST - FOTECOAT 1069 FAST
Shorter exposure time; also suitable for CtS | | FOTECOAT |
 | | | FOTECOAT 1069 HV - FOTECOAT 1069 HV
Extra thick, results in an extra high stencil build-up | | FOTECOAT |
 | | | FOTECOAT 1070 - DIAZO Screen Emulsions dual-cure
Fast, dual-cure diazo photopolymer screen emulsion | for co-solvent ink systems | MATT stencil surface to avoid off-setting in contact with ink-jet films | purple colour | high viscosity | short exposure time. | | FOTECOAT |
 | | | FOTECOAT 1072 - DIAZO Screen Emulsions dual-cure
Fast, duo-cure diazo-polymer screen process emulsion with separate diazo sensitizer powder, for solvent based inks. | Purple color, excellent definition and resolution. | Solvent and humidity resistant. | The ready-made stencil can be post-hardened by light to increase the ink suitability and to facilitate stencil removal. | Short exposure time. | | FOTECOAT |
 | | | FOTECOAT 1075 - DIAZO Screen Emulsions dual-cure
New development for printing with abrasive inks. | Fast, solvent resistant diazo photopolymer screen emulsion, duo-cure. | Excellent flexibility coupled with improved adhesion to the mesh. | Very high definition and resolution. | Appropriate for long press life for the packaging printing industry. | Good transparency with light purple colour. | Recommended for UV inks. | | FOTECOAT |
 | | | FOTECOAT 1076 - Extra high resolution emulsion for V-mesh
Extra high resolution emulsion for V-mesh (VECTRY of NBC) and steel mesh. | Fast, dual cure diazo photopolymer screen process emulsion for solvent based ink systems. | Light blue color. | Medium viscosity. | For lower viscosity water can be added. | Attention: Let degas for 1 week after sensitizing! | | FOTECOAT |
 | | | FOTECOAT 1301 - Fast, dual-cure screen emulsion
Ideal for plastisols, textile printing, glass decoration and printing of first brand ceramic tiles | | FOTECOAT |
 | | | FOTECOAT 1330 - only for the German market
| | FOTECOAT |
 | | | FOTECOAT 1350 - only for the German market
| | FOTECOAT |
 | | | FOTECOAT 14.. - FOTECOAT Emulsions for CtS
Section 1: Presensitized one component emulsions, DIR-EX Line
Section 2: Diazo sensitized emulsions for CtS
Section 3: Usage of both types for Computer-to-Screen equipment (filmless direct exposure) | | FOTECOAT |
 | | | FOTECOAT 1569 - DIAZO Screen Emulsion traditional
100% solvent resistant screen emulsion with separate diazo powder sensitizer. | Normal exposure time; very easy to remove. | Touch ups are practically avoided; wash-out is fast and easy and does not need a high pressure device. | Light purple in color for good transparency. | | FOTECOAT |
 | | | FOTECOAT 1570 - DIAZO Screen Emulsion traditional
Fast, fully solvent resistant screen emulsion with separate diazo powder sensitizer. | Easy to remove. | Blue in color for good transparency. | | FOTECOAT |
 | | | FOTECOAT 1636 - DIAZO Screen Emulsion traditional
Fast, water resistant screen emulsion with separate diazo powder sensitizer for textile screen printing. | Can be decoated with a high ressure water device. | Light purple with good see-through. | | FOTECOAT |
 | | | FOTECOAT 1669 - DIAZO Screen Emulsion traditional
Water resistant screen emulsion with separate diazo powder sensitizer. | Can be decoated with a high pressure water device. | Purple with good contrast. | | FOTECOAT |
 | | | FOTECOAT 1711 - DIAZO Screen Emulsion traditional
Diazopolymer screen emulsion with separate diazo-powder sensitizer for solvent based inks. | Light purple after exposure with excellent transparency. | Ideal for humid and warm climates. | Economic, biologically sound. No warning on the label. | | FOTECOAT |
 | | | FOTECOAT 1771 - DIAZO Screen Emulsion traditional
Hard and fast screen emulsion with separate diazo-powder sensitizer for most solvent based inks. | Blue color after exposure with high contrast. | Ideal for humid and warm climates. | Economic, biologically sound. | No warning on the label. | | FOTECOAT |
 | | | FOTECOAT 1772 - DIAZO Screen Emulsions (separate dye)
High definition screen emulsion with separate diazo-powder sensitizer for most solvent based inks. | Available undyed with separate purple dye or as purple emulsion. | Available for extra short exposure (with C33 diazo-powder) or for standard exposure with C8J sensitizer. | Denomination short version: FOTECOAT 1772 FAST. | Biologically sound, qualified as harmless chemical. | No warning symbol on the label. | | FOTECOAT |
 | | | FOTECOAT 18.. - FOTECOAT SOLO CHECK CHART
FOTECO SOLO is a line of presensitized, one component screen process emulsions | | FOTECOAT |
 | | | FOTECOAT 1811 SOLO - SOLO Screen Emulsion one component ready-to-use
Presensitized screen emulsion; red, solvent and humidity resistant | High viscosity for coarse and fine meshes. | Excellent flow-out; avoiding pin-holes caused by too fast coating. | Usable on white and yellow mesh. | Fast wash-out. | Excellent resistance to solvent based inks and its screen washes. | Decoatable with all chemicals used for emulsion stencil removal. | | FOTECOAT |
 | | | FOTECOAT 1834 SOLO - SOLO Screen Emulsion one component ready-to-use
Green, one-component polymer screen emulsion, ready to use. | 40% solids; viscosity 2200 cps. | Ultra fast exposure time. | Water resistant to a large extent, highly improved flexibility. | The emulsions can be used for: 1) the production of thick stencils by the casting process; 2) the transfer of THICKFILM FOTECAP TECNO. | FOTECOAT 1834 SOLO has good water resistance. | The use of the screen emulsion is described in the leaflet FOTECAP CAPILLARY FILMS. | | FOTECOAT |
 | | | FOTECOAT 1835 SOLO - SOLO Screen Emulsion one component ; high density
Ready-to-use presensitized screen emulsions for the production of extra thick screen process stencils by the wet in wet coating method. | | FOTECOAT |
 | | | FOTECOAT 1836 WR - SOLO Screen Emulsion one component ready-to-use
Fast, presensitized polymer screen emulsion. | Processing under yellow light is recommended because of the high light sensitivity. | FOTECOAT 1836 WR SOLO is magenta, the stencils allow excellent seethrough. | Smaller quantities can be evacuated with the waste water. | Solids content 36%. | Can be used for printing with food products. | | FOTECOAT |
 | | | FOTECOAT 1837 SOLO - SOLO Screen Emulsion one component ; high density
Ready-to-use, presensitized and has a lower viscosity than FOTECOAT 1835 | application is similar. | | FOTECOAT |
 | | | FOTECOAT 1838 SOLO - SOLO Screen Emulsion one component ready-to-use
Fast, presensitized polymer screen emulsion. | Processing under yellow light is recommended because of the high light sensitivity. | FOTECOAT 1838 SOLO is magenta, the stencils allow excellent seethrough. | Smaller quantities can be evacuated with the waste water. | For long runs a small quantity of diazo powder sensitizer can be added directly to the FOTECOAT 1838 SOLO. | The diazo sensitizer is added to the FOTECOAT 1838 SOLO and comes in form of a sachet. | However FOTECOAT 1838 SOLO can be used without the addition of the diazo. | | FOTECOAT |
 | | | FOTECOAT 1840 SOLO - SOLO Screen Emulsion one component ready-to-use
The emulsions can be used for: 1) the production of thick stencils by the casting process; 2) the transfer of THICKFILM FOTECAP TECNO. |
FOTECOAT 1840 SOLO has good solvent resistance. | The use of the screen emulsions is described in the leaflet FOTECAP CAPILLARY FILMS. | | FOTECOAT |
 | | | FOTECOAT 1845 SOLO - SOLO Screen Emulsion one component ; high density
FOTECOAT 1845 SOLO has many unusual aspects and must be used by following the described processing technique. | Should be coated on synthetic fabric numbers from 12-64 / cm or on equivalent stainless steel meshes. | Can be coated by hand or machine wet in wet. | It is possible to apply between 5 to 20 strokes from the squeegee side. | | FOTECOAT |
 | | | FOTECOAT 1846 SOLO - SOLO Screen Emulsion one component ; high density
Ready-to-use presensitized screen emulsions for the production of extra thick screen process stencils by the wet in wet coating method. | | FOTECOAT |
 | | | FOTECOAT 1847 SOLO - SOLO Screen Emulsion one component ; high density
Ready-to-use, presensitized and has a lower viscosity than FOTECOAT 1845/1846 | application is similar. | | FOTECOAT |
 | | | FOTECOAT 1850 SOLO - SOLO Screen Emulsion one component ready-to-use
Extremely fast polymer emulsion, presensitized; free of diazo; | For ink systems based on solvents | Working under yellow light is recommended because of the increased light sensitivity | The emulsion has a light gray-blue color; the stencil has excellent see through | Harmless for sewage water and at the working place if standard industrial precautions are followed | | FOTECOAT |
 | | | FOTECOAT 1855 UV - SOLO Screen Emulsion one component ready-to-use
A remarkable, unusual screen emulsion ! | Over 60% solids, ideal viscosity for machine coating, especially suitable for UV inks. | FOTECOAT 1855 UV is grey-blue. | For many cases (posters etc.) 1 coat on the printing side will be sufficient. | Short exposure time with metal halogen lamp. Rapid wash-out, easy to decoat. | | FOTECOAT |
 | | | FOTECOAT 1860 SOLO - SOLO Screen Emulsion one component ready-to-use
Fast, presensitized emulsion ready-to-coat; free of diazo. | Completely solvent resistant and very easy to decoat. | Green color with high contrast. |Solids content 35%; high viscosity. | Economic to use. | Harmless for sewage and at the working place. | | FOTECOAT |
 | | | FOTECOAT 1884 - FOTECOAT projection emulsions
FOTEC AG manufactures presensitized (ready to use) screen emulsions, solvent resistant, water resistant and co-solvent resistant for projection. | For very fine meshes fast diazo emulsions for magnifications of 3-5 x (with special equipment) can be used. | | FOTECOAT |
 | | | FOTECOAT 1915 WR - DIAZO Screen Emulsions DIR-AD
Fast, duo-cure polymer type textile printing screen process emulsion with separate diazo sensitizer powder, for aqueous ink systems. | Light purple color with excellent see-through. | The ready-made stencil can be post-hardened by light to increase the mechanical and the solvent resistance. | Very short exposure time. | Ecologically sound. | | FOTECOAT |
 | | | FOTECOAT 1920 K - DIAZO Screen Emulsions DIR-AD
Fast, duo-cure polymer type textile printing screen process emulsion with separate diazo sensitizer powder, for aqueous ink systems. | Light blue color with excellent see-through. | The ready-made stencil can be post-hardened by light to increase the mechanical and the solvent resistance. | Very short exposure time. | Ecologically sound. | | FOTECOAT |
 | | | FOTECOAT 1930 K - DIAZO Screen Emulsions DIR-AD
Direct ceramic printing on tiles in single, double and third fire. | Dual-cure diazo/polymer screen process emulsion for printing on ceramic substrates and for ceramic decalcomanias. | Suitable for most ceramic inks. | The emulsion can be post-exposed to reach complete thru-curing. | Possibility to harden chemically with FOTECHEM 2100 to produce permanent stencils. | Blue, high contrast colour to facilitate touch-ups. | FOTECOAT 1930 K is phthalate-free. | | FOTECOAT |
 | | | FOTECOAT 1970 - DIAZO Screen Emulsions DIR-AD
Economic, fool-proof, all purpose screen emulsion. | Dual-cure, photopolymer | Ideal for most ink systems | Can be sensitized by direct addition of the sensitizer powder | The sensitizer is supplied in air-tight, insulated sachets for long shelf-life | Can be post-exposed to improve the through-curing. | Blue colour with high contrast | Excellent adhesion to all meshes | The exposure time is short | Environmentally safe. | | FOTECOAT |
 | | | FOTECOAT 1975 - DIAZO Screen Emulsions DIR-AD
„Universal“ screen emulsion | Dual-cure, photopolymer | Ideal for most ink systems including acqueous UV-inks | The sensitizer is supplied in air-tight, insulated sachets for long shelf-life | Can be post-exposed to improve the through curing. The chemical hardening should be avoided as the stencil might have tendency to get brittle| Dark aqua-marine colour with high contrast | Excellent adhesion to all meshes | Exposure time is relatively long to achieve the best possible resolution coupled with an extended exposure latitude | Environmentally safe | | FOTECOAT |
 | | | FOTECOAT TRIO 1 WR - Trio Line Diazo / Bichromat
Fast, water resistant screen emulsion for textile screen printing. | Can be decoated with a high pressure water device. | Blue color with good see-through. | The diazo powder sensitizer in sachets is supplied separately. | TRIO 1 WR can be sensitized with ammonium dichromate. | | FOTECOAT |
 | | | FOTECOAT TRIO 2 SR - Trio Line Diazo / Bichromat
Fast, solvent resistant screen emulsion. | Blue color with excellent see-through. | Suitable for sensitizing with diazo powder or ammonium dichromate. | Ideal for humid and warm climates. | Economic, biologically sound. No warning on the label. | The diazo sensitizer powder is supplied separately in sachets under the code A2 for 1 kg Sets; A7 for 4,5 kg Sets. | | FOTECOAT |
 | | | FOTECOAT TRIO 3 WSR - Trio Line Diazo / Bichromat
ONE emulsion for most inks. | Fast, dual-cure diazo-polymer screen process emulsion for co-solvent ink systems (inks containing a combination of solvents and water). | Blue color. | The ready-made stencil can be post-hardened by light to increase the resistance against water. | Very short exposure time. | Ecologically sound. | The diazo sensitizer powder is supplied separately in sachets under the code A2 for 1 kg Sets; A7 for 4,5 kg Sets. | Suitable for sensitizing with ammonium dichromate. | | FOTECOAT |
|
 | | | FOTECAP 01 - CHECK CHART all FOTECAP Capillary Films
Capillary Films and there Technical Characteristics | | FOTECAP |
 | | | FOTECAP 02 - TECNO Thick Film for high density stencils
for the production of thick stencils by the direct/indirect method | light green capillary film in thicknesses from 100 to 700 microns | to be transfered with FOTECOAT emulsion | | FOTECAP |
 | | | FOTECAP 4512 CD UV - Dual cure diazo type capillary film
This is an extra thin capillary film with 15 microns dry film thickness to achieve minimal thicknesses proud of the mesh for printing with UV- or aqueous UV-inks. | FOTECAP 4512 CD/UV should be used on monofilament polyester fabric 150-31 Y and finer. | | FOTECAP |
 | | | FOTECAP 4800 - SUPER 100 microns
Extra thick capillary film to be adhered with water alone in the traditional way | Or by the direct/indirect method with screen emulsion. | | FOTECAP |
 | | | FOTECAP 4815 4825 4850 4880 IP - IP stands for “Identical Profile”.
These are new photopolymer capillary films. IP stands for "Identical Profile". They allow the control of the film thickness over the mesh. | | FOTECAP |
 | | | FOTECAP SAPHIR - Dual cure diazo capillary film
Fast exposing, polymer capillary film for all solvent resistant inks. | Ideal for UV standard ink printing. | Print resistance can be increased by post-exposing. | Very short exposure time. | Excellent definition and very high resolution. | Biologically safe. | Available in rolls and sheets. | For the use consult our brochure “FOTECAP capillary film stencils“. | | FOTECAP |
 | | | FOTECAP TOPAZ - Diazo type standard capillary film
TOPAZ: light purple; dry film thicknesses 18, 22, 25, 29, 40 and 52 microns. | TOPAZ is solvent resistant. | Coated on 75 micron clear polyester carrier. | Sheets cut to size and standard width rolls are available. | | FOTECAP |
 | | | FOTECAP ZIRCON - Photopolymer Capillary Film
Diazo-free, long life, fast shooting capillary film. | Exceedingly good image quality for short and long runs. | Perfect solvent resistance and fully reclaimable with high pressure. | Presensitized photopolymer film with high flexibility and superior adhesion to all numbers and types of mesh. | Coated on 75 micron polyester carrier. | | FOTECAP |
|
 | | | FOTECFILM 01 - Exposure Times FOTECFILMS
| | FOTECFILM |
 | | | FOTECFILM 5020 - FOTECFILM 5020 RUBIN
Red, indirect photo stencil film, gelatine based | Ideal to produce stencils for UV-inks | | FOTECFILM |
 | | | FOTECFILM 5030 - FOTECFILM 5030 REDSTAR
Red, indirect photo stencil film, gelatine based | Ideal to produce stencils for UV-inks | | FOTECFILM |
 | | | FOTECFILM 5040 - FOTECFILM 5040 REDTOP
Red, indirect photo stencil film, gelatine based | Ideal to produce stencils for UV-inks | | FOTECFILM |
|
 | | | FOTECFOIL - FOTECFOIL 7700
Clear FILM for INK-JET Printers | FOTECFOIL 7700 is coated on the reverse side and lies therefor very flat | High definition and density | Carrier thickness: 125 microns. | | FOTECFOIL |
 | | | FOTECFOIL - FOTECFOIL 7800
Clear FILM for INK-JET printers | FOTECFOIL 7800 is coated on the "print" side | Good definition and density | Carrier thickness: 100 microns. | | FOTECFOIL |
| |
